IOT BASED LAWN CUTTER
Keywords:
Smart Brush Cutter, Automatic Brush Cutter.Abstract
A good lawn around your home not only enhances your quality of life, but also improves the value of your home and helps the environment by filtering the air and water that passes through it. But also these benefits do have some disadvantages however. Grass requirements are cut regularly. Healthy lawns need proper maintenance system, which are created by regular cutting at proper frequency and height. Un-cut grass is a invitation for diseases and other sickness that carry bugs, beetles, dragon flies etc. Cutting down involves physical effort and time, not to mention the maintenance and cost of a lawn mower. So in this proposal I am going to design a smart brush cutter which does the work using IoT as well as saving time and physical effort for the fellow humans.
Downloads
Download data is not yet available.
References
1. Bo Wu ; Yuan Wu ; Yoko Aoki ; Shoji Nishimura ; Masayuki Kashiwagi: “A Study on the Reduction of Mowing Work Burden for Maintaining Landscapes in Rural Areas: Experiment Design for Mowing Behaviors Analyze” 2019 IEEE Intl Conf on Dependable, Autonomic and Secure Computing, Intl Conf on Pervasive Intelligence and Computing, Intl Conf on Cloud and Big Data Computing, Intl Conf on Cyber Science and Technology Congress (DASC/PiCom/CBDCom/CyberSciTech)
2. M. A. Basunia, N. A. F. Narawi: “IMPROVEMENT OF GRASS CUTTING MACHINE COMMONLY USED IN BRUNEI” 7th Brunei International Conference on Engineering and Technology 2018 (BICET 2018).
3. Haydar Sahin ; Levent Guvenc: “Household robotics: autonomous devices for vacuuming and lawn mowing” IEEE Control Systems Magazine 2017.
4. Yuki Iwano,Takashi Hasegawa,Akihiro Tanaka, Kojiro Iizuka: “Development of the trimmer-type mowing system against a slope” 2016 International Conference on Advanced Mechatronic Systems, Melbourne, Australia, November 30 - December 3, 2016.
5. Shinya ohkawa: “Development of the Autonomous Brush-cutting Robot using Articulated Seering Wheel” Conference ISR ROBOTIK 2014.
6. Hung, Chih-Yu, Chi, Chieh-Tsung: “Study of a New Shoulder-Type Electric Brush Cutter” 978-1-4244-9439-2/112011 IEEE.
7. Chen Zhongjia, Yu Guosheng, Liu Xiaohu, Chen Cheng: “Utilization and harvest of desert brush” 2010 International Conference on Digital Manufacturing & Automation.
8. Sankar K, “Design of Intelligent Controller for a Hydraulic Solar PV System” Vol 9 No 1 (2017): IJMSR International Journal of MC Square Scientific Research.
9. Shinya Ohkawa ; Yoshihiro Takita ; Hisashi Date, “Development of the Autonomous Brush-cutting Robot using Articulated Steering Vehicle” Conference ISR ROBOTIK 2014.
10. Siva S: “AUTOMATIC SOLAR TRACKER” Vol 8 No 1 (2016): IJMSR International Journal of MC Square Scientific Research
11. Visvanathan K: “A hybrid photovoltaic power converter system for Brushless DC Motor operation and Control” Vol 8 No 1 (2016): IJMSR IJMSR International Journal of MC Square Scientific Research
12. Jie-Hua Zhou ; Ji-Qiang Zhou ; Yong-Sheng Zheng ; Bin Kong: “Research on Path Planning Algorithm of Intelligent Mowing Robot Used in Large Airport Lawn” International Conference on Information System and Artificial Intelligence (ISAI) 2016.
13. Kensuke Nomura ; Taku Saito ; Yuhei Yamazaki ; Kyoichi Tatsuno ; Kiyoshi Sota ; Yushi Fuziwara ; Eiji Inoue ; Katsumi Yoshino: “Autonomous mowing robot using a tracking laser rangefinder” 2017 International Symposium on Micro-Nano Mechantronics and Human Science (MHS)
14. Dareen K. Halim ; Tang Chong Ming ; Ng Mow Song ; Dicky Hartono: “Software-based turbo decoder implementation on low power multi-processor system-on-chip for Internet of Things” 2017 4th International Conference on New Media Studies (CONMEDIA)
15. Amudha S, Snehalatha N, ShinyAngel T S : “SMS CONTROLLED SMART HOME SYSTEM IN IOT” Vol 8 No 1 (2016): IJMSR International Journal of MC Square Scientific Research.
2. M. A. Basunia, N. A. F. Narawi: “IMPROVEMENT OF GRASS CUTTING MACHINE COMMONLY USED IN BRUNEI” 7th Brunei International Conference on Engineering and Technology 2018 (BICET 2018).
3. Haydar Sahin ; Levent Guvenc: “Household robotics: autonomous devices for vacuuming and lawn mowing” IEEE Control Systems Magazine 2017.
4. Yuki Iwano,Takashi Hasegawa,Akihiro Tanaka, Kojiro Iizuka: “Development of the trimmer-type mowing system against a slope” 2016 International Conference on Advanced Mechatronic Systems, Melbourne, Australia, November 30 - December 3, 2016.
5. Shinya ohkawa: “Development of the Autonomous Brush-cutting Robot using Articulated Seering Wheel” Conference ISR ROBOTIK 2014.
6. Hung, Chih-Yu, Chi, Chieh-Tsung: “Study of a New Shoulder-Type Electric Brush Cutter” 978-1-4244-9439-2/112011 IEEE.
7. Chen Zhongjia, Yu Guosheng, Liu Xiaohu, Chen Cheng: “Utilization and harvest of desert brush” 2010 International Conference on Digital Manufacturing & Automation.
8. Sankar K, “Design of Intelligent Controller for a Hydraulic Solar PV System” Vol 9 No 1 (2017): IJMSR International Journal of MC Square Scientific Research.
9. Shinya Ohkawa ; Yoshihiro Takita ; Hisashi Date, “Development of the Autonomous Brush-cutting Robot using Articulated Steering Vehicle” Conference ISR ROBOTIK 2014.
10. Siva S: “AUTOMATIC SOLAR TRACKER” Vol 8 No 1 (2016): IJMSR International Journal of MC Square Scientific Research
11. Visvanathan K: “A hybrid photovoltaic power converter system for Brushless DC Motor operation and Control” Vol 8 No 1 (2016): IJMSR IJMSR International Journal of MC Square Scientific Research
12. Jie-Hua Zhou ; Ji-Qiang Zhou ; Yong-Sheng Zheng ; Bin Kong: “Research on Path Planning Algorithm of Intelligent Mowing Robot Used in Large Airport Lawn” International Conference on Information System and Artificial Intelligence (ISAI) 2016.
13. Kensuke Nomura ; Taku Saito ; Yuhei Yamazaki ; Kyoichi Tatsuno ; Kiyoshi Sota ; Yushi Fuziwara ; Eiji Inoue ; Katsumi Yoshino: “Autonomous mowing robot using a tracking laser rangefinder” 2017 International Symposium on Micro-Nano Mechantronics and Human Science (MHS)
14. Dareen K. Halim ; Tang Chong Ming ; Ng Mow Song ; Dicky Hartono: “Software-based turbo decoder implementation on low power multi-processor system-on-chip for Internet of Things” 2017 4th International Conference on New Media Studies (CONMEDIA)
15. Amudha S, Snehalatha N, ShinyAngel T S : “SMS CONTROLLED SMART HOME SYSTEM IN IOT” Vol 8 No 1 (2016): IJMSR International Journal of MC Square Scientific Research.
Downloads
Published
2019-06-28
Issue
Section
Articles
License
Authors need to sign following agreement with International Journal of MC Square Scientific Research before publishing their articles:
- Authors need to return copyright form to Journal Editor-in-chief to proceed their articles for publication. Meantime, the journal licensed under a Creative Commons Attribution License, which permits other user to distribute the work with an acknowledgement of the authors for International Journal of MC Square Scientific Research.
- Authors are also able to share their separate, additional contractual arrangements for the non-restricted contribution of the journal with an acknowledgement of publication in International Journal of MC Square Scientific Research.
- Authors are allowed and encouraged to share their work during the submission process for increasing citation and exploring to increase the paper availability in worldwide way. The Effect of Open Access.
