VLSI BASED Mixed-Radix 8-2 Butterfly FFT with bit reversal for 802.11a
DOI:
https://doi.org/10.20894/IJMSR.117.002.001.011Keywords:
OFDM, FFT/IFFT, VLSI, VHDL, Mixed Radix with bit reversal.Abstract
OFDM has received a great deal of attention and been adopted in many new generation wideband data communication systems such as IEEE 802.11a. In these communication systems the different applications mentioned above have different demands in operation speed and length of FFT/IFFT. The modified Mixed Radix 8-2 Butterfly FFT with bit reversal for the output sequence derived by index decomposition technique is our proposed VLSI system architecture to design the prototype FFT/IFFT processor for OFDM systems. In this paper the analysis of FFT algorithms such as mixed radix 4-2 and mixed radix 8-2 were designed using VHDL. The results show that the proposed processor architecture can greatly save the area cost while keeping a high-speed processing speed, which may be attractive for many real-time systems. By using the proposed structure, the proposed algorithm makes an offer the simple bit reversal mechanism which is only supported by a fixed radix FFT algorithm.
Downloads
References
[2] Daisuke Takahashi,2001,"An Extended Split-Radix FFT Algorithm", IEEE Signal Processing Letters, Vol. 8, No. 5, pp. 145-147.
[3] Gordon L. Demuth,1989 "Algorithms for Defining Mixed Radix FFT Flow Graphs", IEEE Trans Acoust, Speech, and Signal Processing, Vol. 37, No. 9, pp. 1349-1358.
[4] C. Sidney Burrus, "Index Mapping for Multidimensional Formulation of the DFT and Convolution", IEEE Trans. Acoust., Speech, and Signal Processing, Vol. ASSP-25, June. 1977, pp. 239-242.
[5] Lihong Jia, Yonghong GAO, Jouni Isoaho, and Hannu Tenhunen, "A New VLSI-Oriented FFT Algorithm and Implementation", IEEE ASIC Conf., Sep. 1998, pp. 337-341.
[6] Martin Vetterli and Pierre Duhamel, "Split-Radix Algorithms for Length-ptmDFT's", IEEE Trans. Acoust, Speech, and Signal Processing, Vol. 37, No. 1, Jan. 1989, pp. 57-64.
Downloads
Published
Issue
Section
License
Authors need to sign following agreement with International Journal of MC Square Scientific Research before publishing their articles:
- Authors need to return copyright form to Journal Editor-in-chief to proceed their articles for publication. Meantime, the journal licensed under a Creative Commons Attribution License, which permits other user to distribute the work with an acknowledgement of the authors for International Journal of MC Square Scientific Research.
- Authors are also able to share their separate, additional contractual arrangements for the non-restricted contribution of the journal with an acknowledgement of publication in International Journal of MC Square Scientific Research.
- Authors are allowed and encouraged to share their work during the submission process for increasing citation and exploring to increase the paper availability in worldwide way. The Effect of Open Access.